- Sanity check: make sure all cables are plugged into the right ports and the TV is set to the right setting. Still not working.
- Sanity check: turn off and on DVR and TV. Still not working.
- Move HDMI cable from port 1 to port 2 on TV, then port 3. Still not working.
- Get new HDMI cable from basement and test DVR and TV. Still not working.
- Test laptop HDMI into ports 1, 2, and 3 on TV. Laptop output to TV not working.
- Unplug power from TV, wait 10 seconds, plug back in. Eureka! It's working!
The trick is to continually isolate a single factor and remove that factor from consideration. If I had not tried the laptop, I doubt I ever would have figured out the problem. But I needed to test with an input other than the DVR to isolate the DVR and TV from each other to determine which was the problem. I'm just glad I was able to fix the TV so easily.